Product Description

The Bosch Rexroth CSH01.1C-PL-ENS-NNN-MD1-S2-S-NN-FW is a control unit for IndraDrive controllers. The control unit, power section and control unit firmware make up a complete IndraDrive controller. These controllers are typically deployed for industrial and commercial applications such as machine tools, printing machines, food machines and mounting systems. The controllers are deployed in combination with a compatible Bosch motor. The function of the IndraDrive controller is to control motor speed, torque and position. The control unit is a modular device: it has four slots for plug in modules. The available plug in modules include a wide range of communication modules, encoder modules, I/O extension modules and safety modules. The control unit also has a slot for a removable memory module that is used for reading and storing firmware, drive parameters and operating data.

There are two variants of the memory card: PFM02.1-016-NN-FW with loaded firmware and PFM02.1-016-NN-NW preformatted for easy parameter transmission. The pre-installed modules on the CSH01.1C-PL-ENS-NNN-MD1-S2-S-NN-FW include a safety module with safe option support in slot 4, an encoder IndraDyn module in slot 1 and a digital I/O extension module in slot 3. One slot on the CSH01.1C-PL-ENS-NNN-MD1-S2-S-NN-FW is vacant and customers can use it for a plug in module of their choice. The CSH01.1C-PL-ENS-NNN-MD1-S2-S-NN-FW control unit works with a standard control panel. This control panel should not be connected or disconnected when the control unit is powered on. The control unit supports Parallel interface for master communication. The CSH01.1C-PL-ENS-NNN-MD1-S2-S-NN-FW is designed for vertical mounting. It cools via natural convection. The recommended ambient temperature range for drive operation is 0 to 40 degrees Celsius. Only qualified personnel should handle and operate the CSH01.1C-PL-ENS-NNN-MD1-S2-S-NN-FW control unit.