Product Description

The CSH01.1C-PL-ENS-NNN-MA1-S2-S-NN-FW is a Bosch Rexroth digital control unit. It is a modular device that supports a wide range of optional hardware modules. There are four slots on the device. Three slots are available for optional plug in modules. One slot is available for an optional safety module. Slot 1 on the CSH01.1C-PL-ENS-NNN-MA1-S2-S-NN-FW features an encoder IndraDyn module. Slot 2 on the control unit is vacant. Slot 3 on the CSH01.1C-PL-ENS-NNN-MA1-S2-S-NN-FW features an analog I/O extension module. Slot 4 on the device features a safety module that supports safety technology I/O. The CSH01.1C-PL-ENS-NNN-MA1-S2-S-NN-FW works with a standard control panel, which does not support hot swap. To be recognized, the control panel must be connected to the unit before it is powered on. The CSH01.1C-PL-ENS-NNN-MA1-S2-S-NN-FW features a parallel interface for master communication.

The CSH01.1C-PL-ENS-NNN-MA1-S2-S-NN-FW is a control unit. It is one of the two main components that make up an IndraDrive controller. The other main component is a power section. The control unit mounts on the power section. The power section supplies power for the control unit and for the modules installed on the control unit. Power draw of the CSH01.1C-PL-ENS-NNN-MA1-S2-S-NN-FW is 7.5 Watts. The typical inrush current is 4 Amps. The encoder module installed on the control unit draws 6 Watts power. The parallel communication interface draws 1 Watt power. The safety module installed on the control unit draws 1 Watt power. The analog I/O module installed on the control unit draws 2 Watts power. The control unit mounts in the vertical orientation and cools via natural convection. The recommended temperature range is 0 to 40 degrees Celsius. Only trained personnel should operate the control unit.