Product Description

The CSH01.1C-PL-ENS-EN1-MA1-S2-S-NN-FW advanced control section by Bosch Rexroth is one of the major parts of a drive controller. This section is at risk of damage when it comes into contact with electrostatic charges. The product allows connection to and removal from the power section up to 20 times. The device is designed for operation only within industrial environments. The unit cannot be operated outside the manufacturer’s specified ambient conditions. It is required to follow the safety requirements and regulations of the country where it is used. The control section features a very hot housing during operation.

The section must not be turned on without establishing its ground connection. The product has to be kept secure against the penetration of water and foreign objects. This device handling should be done using suitable protective gear like a hard hat and other safety accessories. The unit has only one axis. Its digital inputs/outputs require an external supply voltage connection for its operation. The section is used with signal sources featuring the least impedance at the first analog input for a low degree of linearity error. This product encompasses two digital inputs that have the ability to function like travel range limit switches.

The device is associated with two current control, position control and velocity control cycle times. The unit has several combined I/Os that feature configuration as either a digital input or a digital output. It features Safe Motion safety technology that supports multiple application-related safety functions such as safe stop, safe maximum speed, safe communication and more. The section is connected to the safety module through a 9-pin D-Sub female connector and a connection cable with 0.25mm² to 0.5mm² stranded wire. The product works with a standard control panel. This one-axis control section with a one-year warranty can be sent to any global destination.