Product Description

The CSH01.1C-PL-ENS-EN1-EN2-L1-S-NN-FW advanced control section manufactured by Bosch Rexroth is not meant to be used on its own. The control section features a design code of 1. This product is fitted in a drive controller which is installed inside a control cabinet. The device must feature no electric power connection when its parts or components are accessed. The unit features a leakage current of more than 3.5mA. Its power connection has to be isolated using OFF switches or buttons to avoid unintentional startup. The section should be cooled for at least 15 minutes after it is turned OFF before touching it.

This product must neither be jammed nor crushed during its handling and mounting. The device has a type plate featuring its type designation on its housing. The unit also has a configuration slot for configuration based on the requirement. Its PL interface has galvanically isolated inputs and outputs. The control section is connected with this interface at its X15 connector through a 37-pole D-Sub connector using a 0.08mm² to 0.5mm² cross-section. The product incorporates standard encoder evaluation. The device is free of harmful substances like asbestos and mercury that harm the environment. The section features one-year backup support.

The control section is housed in the drive controller that is operated with the manufacturer’s asynchronous, frameless synchronous spindle or synchronous motors. The unit might get damaged due to frequent mounting and dismounting actions. It has a standard design. The section has one relay contact of Type 2 with a ready-for operation factory setting. The product may trigger property damage or personal injury due to incorrect use. The drive controller with the device has to be programmed before it is commissioned so that the motor performs the application-specific functions. The section is to be used only in industrial environments. This control section is sent all over the world through reputed freight carriers.