Product Description

Bosch is a multinational corporation with a significant presence in over 150 nations. From servo motors to drive controllers, Bosch manufactures products that improve the world. With a fervor for technology and a commitment to client pleasure, Bosch is always progressing.

The CSH01.1C-PL-EN2-NNN-MD1-S1-S-NN-FW model supports a master parallel interface connection; however, firmware is offered separately. The width-modulation model may be customized to meet your requirements with a frequency range of 2 to 16 kHz and a pulse width of 100 ms. This CSH01.1 control section has one analog input, one RS232 serial interface, and four digital outputs. The model has a width of 103mm, a height of 241mm, and a depth of 49.5mm; its SERCOS cycle time is 250 microseconds. The control section's option 3 slot features a digital extension I/O, and its design employs natural convection cooling. The control section has seven to eleven digital inputs and must be used with the appropriate attachments and accessories. The device's slot 1 encoder is an EnDat2.1 encoder, whereas slot 2 is vacant. The CSH01.1 control section has eleven digital inputs, of which two are touch probes and a 4-amp inrush current. The model must be put in a machine that meets national legislation and safety standards, and it must be handled by a qualified person.

The model CSH01.1C-PL-EN2-NNN-MD1-S1-S-NN-FW has an S1 safety option, a control panel that consumes 1 watt of power, and a relay output. The model features current control times ranging from 62.5 to 125 microseconds, position control times ranging from 250 to 500 microseconds, and speed control times ranging from 125 to 250 microseconds, and its power consumption is 7.5 W. This model (CSH01.1C-PL-EN2-NNN-MD1-S1-S-NN-FW) may only be placed within 1,000 meters of sea level with the drive controller.