Product Description

Bosch Rexroth is the international frontrunner in the production of high-quality industrial products, including drive controllers, servo motors, drive inverters, and brake choppers, among others. Bosch has been synonymous with quality owing to its commitment to excellence and innovation.

The CSH01.1C-PL-EN2-MEM-MA1-S2-S-NN-FW model consumes 7.5 watts and has an inrush current of 4 amps. Using the cycle time function, you may adjust the velocity between 125 and 250 microseconds, the current between 62.5 and 125 microseconds, and the position between 250 and 500 microseconds. The CSH01.1 control section has dimensions of 103mm (width) x 49.5mm (depth) x 241mm (height). Option 1 encoder for the model is an EnDat2.1 encoder consuming 6 W of power and the standard control panel. This device has four digital outputs and eleven digital inputs. This type is an integral component of the Rexroth drive system and has a single RS232 serial interface. The model has the S2 safety feature and programmable firmware (must be purchased separately). The CSH01.1 control section consists of single analog input and a single relay contact. Option 2 slot on the model has an encoder emulator, while option 3 slot features analog extension I/O. Drive controllers are often provided alongside the control section, however, control sections may alternatively be sent independently. This model has two analog outputs and a minimum SERCOS cycle time of 250 microseconds.

The model CSH01.1C-PL-EN2-MEM-MA1-S2-S-NN-FW must be installed and operated under the specified environmental conditions by a qualified technician. The model has a 1 W-consuming parallel interface communication module. The model is a component of a sophisticated single-axis drive controller for machine tools, handling systems, and mounting systems used in the printing, packaging, and food processing sectors.