Product Description

The CSH01.1C-PL-EN2-EN1-MEM-S1-S-NN-FW advanced control section may cause personnel injury or property damage due to improper use. The Bosch Rexroth control section is to be used in its original state without any hardware modification. The product is meant to be connected with only the manufacturer’s cables. The device is not intended to be used in public low-voltage mains supplying residential areas. The unit requires proper transportation and storage. It needs to be mounted and installed for safe and optimum operation. Its operation must be carried out if the application adheres to the national EMC regulations. The section installation and operation have to be done by qualified and trained personnel.

The product portrays a leakage current of more than 3.5mA. The device has two encoders at the X4 and X8 connecting points. The unit has to be disconnected from the mains and secured against reconnection for cleaning, maintenance and/or repair work. Its equipment grounding connection should be done using a copper wire with a cross-section of at least 10mm² or 8AWG. The section is free of harmful substances like mercury, chlorinated hydrocarbons and asbestos that can have adverse effects on the environment. This product has a separate type plate for its firmware. The device has only one axis.

The advanced section supports the connection of two conductors in a single terminal connecting point by using TWIN ferrules or wires with the same cross-section. The unit needs a separate power supply for its isolated inputs/outputs. Its spring terminals feature wiring with a wire that has or does not have ferrules. The section is characterized by a maximum pulse width of 100ms. The product must encompass a protective diode in its power supply for protection against polarity reversal of its supply voltage. This CSH01.1C-PL-EN2-EN1-MEM-S1-S-NN-FW control section with its warranty for one year can be delivered to any address irrespective of the country you live in.