Product Description

The CSH01.1C-PB-ENS-MA1-MD1-S1-S-NN-FW is a configurable control section. It belongs to the category of advanced control sections that Bosch develops for IndraDrive drive controllers. Other types of control sections developed by Bosch include basic and basic universal units. A standard control panel can be used to monitor and configure the CSH01.1C-PB-ENS-MA1-MD1-S1-S-NN-FW. This type of control panel is not hot-swappable and must be connected prior to system power on. Each IndraDrive controller has four components which are a power section, a control section, firmware and a control panel. The standard practice is to supply configured controllers that have all parts connected and assembled. When supplied separately, the control section is plugged into the power section. This activity must be performed by trained technical personnel. For equipment protection, the number of plug-in action is limited to 20.

The CSH01.1C-PB-ENS-MA1-MD1-S1-S-NN-FW features four optional plug in modules including a safety technology I/O safe module, an IndraDyn encoder module, a digital I/O extension module and an analog I/O extension module. Multiple options are available for the master communication interface: the CSH01.1C-PB-ENS-MA1-MD1-S1-S-NN-FW supports Profibus. One RS-232 serial interface is also available on the CSH01.1C-PB-ENS-MA1-MD1-S1-S-NN-FW. This interface is used for communication with terminals and computers. The number of integrated analog inputs and outputs on the CSH01.1C-PB-ENS-MA1-MD1-S1-S-NN-FW are one and two respectively. One normally open relay contact is also available. The CSH01.1C-PB-ENS-MA1-MD1-S1-S-NN-FW supports multiple switching frequencies including 2, 4, 8, 12 and 16 kilohertz. The minimum SERCOS cycle time is 250 microseconds. Two position control cycle times are supported including 250 microseconds and 500 microseconds. IndraDrive controllers and components perform optimally at 0 to 40 degrees Celsius temperature and 0 to 1000 meters altitude.