Product Description

The CSH01.1C-PB-ENS-EN1-EN2-NN-S-NN-FW is a digital control section. It is part of the CSH series of devices. Bosch provides three different types of control sections for controllers from the IndraDrive product line. These include basic, basic universal and advanced control sections. The three types differ in terms of their configurability, integrated interfaces and supported cycle times / pulse frequencies. The CSH01.1C-PB-ENS-EN1-EN2-NN-S-NN-FW belongs to the category of advanced control section. It is also configurable and can be configured from only a standard control panel. The CSH01.1C-PB-ENS-EN1-EN2-NN-S-NN-FW is a modular device. The front panel of the unit contains four slots that can accommodate optional modules. One of the slots is dedicated for an optional safety module. The remaining three slots can be used for plug in modules. The slot for safety modules on the CSH01.1C-PB-ENS-EN1-EN2-NN-S-NN-FW is vacant.

Slot 1 on the CSH01.1C-PB-ENS-EN1-EN2-NN-S-NN-FW contains an encoder Indradyn module. Slot 2 on the unit contains an encoder HSF / RSF module. Slot 3 on the unit contains an encoder module with EnDat 2.1 interface. Advanced control sections can be ordered with a range of master communication interfaces including MultiEthernet, SERCOS and CANopen. The CSH01.1C-PB-ENS-EN1-EN2-NN-S-NN-FW features Profibus master communication. The device firmware has to be ordered as a separate subposition. The CSH01.1C-PB-ENS-EN1-EN2-NN-S-NN-FW is one component of a IndraDyn controller. The other components include a power section, firmware and a control panel. The control section can get damaged by electrostatic discharge. Therefore exposed conductive parts that could come into contact with it must be discharged through grounding. The control section should be stored and transported when inside conductive packaging. Only qualified personnel should handle the unit and only approved accessories should be used.