Product Description

Bosch Rexroth is a market leader in the design and manufacturing of advanced industrial automation components. Bosch is known for producing high-quality industrial tools at a reasonable price.

The CSH01.1C-PB-EN2-EN2-MEM-L2-S-NN-FW model has a PROFIBUS communication module and has 11 digital inputs and an L2 safety option. Velocity control in the 125-250 millisecond range, current control in the 62.5-125 millisecond range, and position control in the 250-500 millisecond range are all possible using the cycle time function. With a power consumption of 7.5 kW and a 4 A inrush current, the CSH01.1 control section is built to outlast. Rexroth drive controllers are at the cutting edge of technology and manufacturing, and they are carefully tested before shipping to ensure safe operation and dependability. The drive controllers were designed for industrial usage and should only be used according to the instructions. Both option 1 and option 2 encoders in the model are EnDat2.1 encoders. When powered by a 24-volt DC power supply, the model has a pulse width of 100 milliseconds, and the firmware must be obtained separately. In the control section, a single relay contact with a switching frequency of 2 to 16 Hz is employed. The CSH01.1 control section's minimum SERCOS cycle time is 250 milliseconds, and cycle timings vary based on the firmware version.

The model CSH01.1C-PB-EN2-EN2-MEM-L2-S-NN-FW has four adjustable digital outputs, as well as a single analog input and two analog outputs. An encoder emulator is included with the model, as well as a standard control panel. The control section (CSH01.1C-PB-EN2-EN2-MEM-L2-S-NN-FW) was created for usage in a manufacturing setting and should be used only for that. Scenarios involving property damage and injury to a person may arise if they are not used properly.