Product Description

Bosch Rexroth is a pioneer in the design and production of sophisticated industrial automation components. Bosch is recognized for manufacturing high-quality industrial tools at a fair price.

The CSH01.1C-PB-EN1-NNN-NNN-NN-S-XP-FW model possesses four digital outputs that may be adjusted, as well as a single analog input and two analog outputs. The model employs stranded wire with a diameter of 0.75 to 1.50 mm and PROFIBUS master communication. The CSH01.1 control section was designed for use in a manufacturing environment and should only be used for that purpose. If they are not used appropriately, situations involving damage to property and personal injury may emerge. The model has 11 digital inputs and a single RS232 serial port. The cycle time function allows for velocity control in the 125-250 millisecond range, current control in the 62.5-125 millisecond range, and position control in the 250-500 millisecond range. The model is made to last, with an HSF/RSF encoder and power consumption of 7.5 kW and a 4 A inrush current. Rexroth drive controllers are at the bleeding edge of technology and manufacture, and they are thoroughly tested before being delivered to assure operational safety and dependability. The drive controllers were made for industrial use and should be used only as directed. The minimum SERCOS cycle time for the CSH01.1 control section is 250 milliseconds, and cycle timings vary depending on the firmware version.

The model CSH01.1C-PB-EN1-NNN-NNN-NN-S-XP-FW has a pulse width of 100 milliseconds when driven by a 24 volt DC power supply, and the firmware must be purchased separately. A single relay contact with a switching frequency of 2 to 16 Hz is used in the control section. Wake Industrial provides a replacement warranty on this product (CSH01.1C-PB-EN1-NNN-NNN-NN-S-XP-FW) that can be delivered to your specified address.