Product Description

The CSH01.1C-NN-ENS-NNN-MD1-S1-S-NN-FW control section from Bosch Rexroth is used in the manufacturer’s drive controller. The advanced section has to be plugged inside the power section. This product must not be mounted and dismounted several times as doing so can result in its damage. The device belongs to the CSH product group of such offerings. The unit must not be brought into contact with exposed conductive parts that have not been discharged by means of a grounding action. It is intended to be put to use only in industrial environments. The drive controller associated with the control section is widely deployed in machine tools.

The section comes with a line code of 1. This product can be configured based on user requirements. The device does not have any module to support master communication. The unit has an IndraDyn / Hiperface / 1Vpp / TTL encoder at its X4 connecting point through a 15-pole D-Sub female connector. This encoder features a typical supply voltage of 11.6V and a maximum output current of 500mA. It renders standard encoder evaluation. The control section does not support operation with the manufacturer’s VCP01.2 comfort control panel. The product is associated with a one-year warranty backup and can be dispatched to any destination across the world.

The device encompasses two Type 2 digital inputs that can be configured as probe. The unit implements Safety Technology I/O that permits various application-related safety functions. Its firmware has to be ordered as a separate subitem. The control section should be used only in its original state without any structural changes. The product is likely to cause property damage or personnel injury when it is used inappropriately. This device can be used for single-axis and multiple-axis related tasks. The unit is meant to be operated only with accessories that are approved by the manufacturer.