Product Description

The CSH01.1C-NN-EN2-NNN-NNN-S2-S-NN-FW advanced control section offered by Bosch Rexroth portrays both analogs as well as digital inputs and outputs. The control section uses high-side switches to realize its digital outputs. These outputs have a maximum 500mA current rating per output. The section has two cycle times for its position control, velocity control and current control depending on its firmware. The product depicts eight-fold sampling for the analog inputs. The device has multiple combined I/Os that permit configuration as either a digital input or a digital output. The unit is provided with a power supply by means of the 0V and 24V terminal connectors at the power section for its inputs and outputs.

The spring terminals at the connection points of this section must be wired with wire ends that do not have ferrules whenever possible. The section incorporates a Safe Motion optional module that permits several application-related safety functions. This product must depict a connection to the female 9-pin D-Sub connector using a cable with 0.25mm² to 0.5mm² cross-section stranded wires. The standard control panel used with the device is not recommended for hot plugs. It should not be fitted to or removed from the control section when the drive controller is turned ON.

The single-axis section supports mounting and dismounting up to a maximum of 20 times. The control panel connected to the H1 interface of the product helps in setting the drive address, establishing the position data reference, setting the analog outputs and more. The device is supposed to be protected against polarity reversal of its supply voltage and incorrect connection by incorporating a protective diode in the power supply. Its digital outputs feature protection against overload and short circuit. The outputs are capable of actively supplying current but not sinking it. This advanced section with warranty backup for one year is delivered to the desired address in a country through a renowned logistics team.