Product Description

The CSH01.1C-NN-EN2-NNN-MA1-S2-S-NN-FW is one of the most sophisticated control devices manufactured by Rexroth Indramat to carry out automation control in the industrial servo system. This control device is designed according to American and European quality standards; it features a durable housing unit that protects it from the interference of large solid substances. The operation of this drive controller is very easy and straightforward. The controller contains a user-friendly control panel that allows operators to set the drive address, establish the position data reference, look at the error memory, and set the analog outputs.

The CSH01.1C-NN-EN2-NNN-MA1-S2-S-NN-FW industrial control device is about 241 millimetres long, 103 millimetres wide, and about 49.5 millimetres thick. This industrial drive controller belongs to the C3 product category; this means its operation can only be supported by the high electrical voltage sent to industrial areas. This drive controller is tested and certified to operate according to the technical data in its documentation before operation; it is also supplied with a type label with the user can use to verify the features of the controller after it has been delivered. The power circuit of this drive controller can generate a leakage current as high as 3.5 milliamperes during operation. The controller should be securely grounded before it is switched on for operation to prevent industrial accidents.

The CSH01.1C-NN-EN2-NNN-MA1-S2-S-NN-FW industrial features connection points that are equipped with screw terminals and screw terminal blocks which makes the integration of electrical cable into the controller very easy. The maximum permissible height at which this control device can be installed is 1000 meters above sea level; operating the controller above this height can cause a significant reduction in the efficiency of the device.