Product Description

The Bosch CSH01.1C-ET-ENS-NNN-MD2-S2-S-NN-FW is a modular control section. It forms a drive controller in combination with a power section. The modular structure allows multiple plug-in modules and safety modules to be installed on the unit. Slot 3 on the CSH01.1C-ET-ENS-NNN-MD2-S2-S-NN-FW contains a digital I/O extension module with SSI encoder. This option is a combined extension of two functions: digital I/O extension and SSI encoder evaluation The digital I/O function supports 16 inputs and 16 outputs. The inputs are divided into two input groups with a separate supply voltage for each group. The outputs are divided into four output groups with a separate supply voltage for each group. The SSI encoder allows absolute position detection for different encoders with SSI interfaces. The other plug-in module that is installed on the CSH01.1C-ET-ENS-NNN-MD2-S2-S-NN-FW is an IndraDyn encoder module that supports Hiperface.

One slot for plug-in modules on the CSH01.1C-ET-ENS-NNN-MD2-S2-S-NN-FW is empty. The safety option installed on the control section is safe motion. As per standard practice the control section is supplied from the factory as part of the drive controller. In some cases Bosch does provide the control section separately. A type plate is attached to the CSH01.1C-ET-ENS-NNN-MD2-S2-S-NN-FW and lists information including the product type code, the part number, serial number and hardware index. A type plate for the firmware is also attached to the front of the control section. Advanced control sections such as the CSH01.1C-ET-ENS-NNN-MD2-S2-S-NN-FW are suitable for single-axis control applications. The unit only operates with a standard control panel. One integrated RS-232 serial interface is provided for serial communication with computers or VT100 terminals. The installation and operation of the CSH01.1C-ET-ENS-NNN-MD2-S2-S-NN-FW should be performed by trained personnel.