Product Description

The CSH01.1C-ET-ENS-NNN-MA1-S2-S-NN-FW is a single configurable axis industrial drive controller produced by highly trained technicians of Rexroth Indramat according to the American and European quality standards. This control device is designed according to the IP20 protection class; it is also specially structured to aid the integration of the drive controller into any position in the industrial servo system. This drive controller represents an advancement over conventional industrial control device; it is a self-diagnostic device that can independently detect and call the attention of the operator to any operational anomaly by displaying error messages on its display unit and by flashing warning lights through the special light-emitting diodes present on its housing unit. Under normal operating conditions, this industrial drive controller maintains an operational efficiency as high as 95 percent; this makes it the perfect control device for industrial production machines with complex operational requirements.

The CSH01.1C-ET-ENS-NNN-MA1-S2-S-NN-FW industrial drive controller is not supplied with a firmware module; it is the responsibility of the user to order the firmware module as a separate sub-position depending on the industrial application the controller is intended for. This drive controller does not contain any configuration slot for safety technology; however, it contains about 7 to 11 digital inputs and 0 to four digital output. The electrical power is supplied through the terminal connectors 24 volts, and 0 volts at the power section, the power consumed by this controller during operation is about 7.5 watts, while the typical inrush current is about 4 amperes.

The maximum permissible temperature at which this industrial drive controller can be operated is about 45 degrees Celsius, while the maximum installation height for the device is about 1000 meters above sea level.