Product Description

The Rexroth CSH01.1C-ET-ENS-MA1-MD1-NN-S-NN-FW is a control section.  A typical drive controller is composed of two essential parts, a control section and a power section. A control section is a separate component that is plugged into the power section. As a standard, the drive controller is supplied complete, fitted with control section. If it is not pre-fitted, personnel trained in mounting and dismounting control sections will be required to plug the control section to the power section. Machines in which control systems are used include conveyor belts, printing and paper processing machines, food packaging machines, among others. The control section should be used with the accessories and parts recommended by the manufacturer. Installation and operation of components is only permitted by trained and qualified personnel using the software and firmware specified by Rexroth. Additionally, it is important that the components are operated under the defined operating conditions such as ambient temperatures, maximum height above sea level, relative humidity etc. Using the control section outside of the operating conditions can lead to harm to the operators which could in severe cases be fatal. Risk of electric shock and hot surfaces also exist in their usage.

The digital inputs for the CSH01.1C-ET-ENS-MA1-MD1-NN-S-NN-FW have an input voltage and current of 24 Volts and 3 milliamperes respectively. The digital outputs have an output voltage and current of 24 Volts and 0.5 Amperes respectively. It has a memory card slot in its X7 connector slot. It has a H1 connection point interface for the control panel X2 and a serial interface connection point. It has a MultiEthernet encoder as its master communication. The option 1(X4) connector has an IndraDyn/Hiperface/1Vpp/TTL encoder. The control section has an Analog I/O extension and Digital I/O extension. It has a standard control panel and firmware is to be ordered as a separate subitem.