Product Description

The CSH01.1C-ET-ENS-ENS-NNN-L2-S-NN-FW is a highly advanced and sophisticated drive controller manufactured by Rexroth Indramat to carry out accurate automation control in the industrial servo system. This controller is designed according to American and European quality standards; it features durable components and maintains an operational efficiency as high as 95 percent under ideal operating conditions. The configuration, installation, and general operation of this industrial drive controller is designed to be very easy; however, operators must ensure these are carried out exactly according to the instructions stated in the documentation of the device. This drive controller contains a sophisticated operator panel through which industrial operators can monitor the operational status of the servo system and send in operational commands in real-time.

The CSH01.1C-ET-ENS-ENS-NNN-L2-S-NN-FW industrial drive controller is not supplied with a firmware module; this has to be ordered as a separate sub-position depending on the industrial application for which the controller is required. The typical input current required by this drive controller for optimum operation is about 4 amperes, while the maximum pulse width in the controller is 100 milliseconds. The operation of this drive controller can be supported by a 24-volt power connection; also, during operation, this drive controller can generate a leakage current of about 3.5 milliamperes; to prevent electrical accidents, the controller should be properly grounded before operation.

The CSH01.1C-ET-ENS-ENS-NNN-L2-S-NN-FW industrial drive controller contains special light-emitting diodes, which indicate the connection network available and the data transmission running in the drive controller. Before delivery, all parts of this drive controller are checked and certified to operate according to the technical data present in the housing of the controller.