Product Description

The CSH01.1C-ET-EN2-NNN-MA1-S2-S-NN-FW advanced control section manufactured by Bosch Rexroth has a 1 design code. This control section does not support operation with the VCP01.2 comfort control panel. The product is connected with its Multi-Ethernet interface to provide master communication using shield ITP cables as per CAT5e specifications. The device uses a standard 8-pin RJ-45 connector for Ethernet connectivity. The X4 connector of the unit encompasses an EnDat 2.1 / 1Vpp / TTL encoder that helps in interface encoder evaluation. The encoder has a DC output voltage of 5.25V with voltage return and an output current rating of 350mA. It is possible to configure this control section.

The control section depicts two current control, position control, velocity control cycle times and one minimum SERCOS cycle time. The section also supports multiple switching frequencies from 2kHz to 16kHz. The product is utilized with the manufacturer’s drive controller that helps in controlling and monitoring the operation of the connected electric motor. The device must be transported and stored only in conductive packaging. The unit should not be allowed to come in contact with exposed conductive parts that have not been discharged by means of appropriate grounding. This CSH01.1C-ET-EN2-NNN-MA1-S2-S-NN-FW control section can be sent worldwide through reputed freight carriers.

The control section should never be used outside the specified operating conditions. The section is intended to be used only with spare parts and accessories approved by the manufacturer. The product may have a high electric current and high voltage due to inappropriate use. The device tends to have a very hot surface during operation and can cause burns if touched during or soon after this period. The unit must be operated and maintained only by trained and qualified personnel. Its electrical connection points are not meant to be touched when the power is turned ON. This advanced section is backed by one-year warranty support.