Product Description

The CSH01.1C-ET-EN1-NNN-NNN-S2-S-NN-FW is a sophisticated industrial controller designed by Rexroth Indramat to control induction and synchronous motor used in industrial production systems. This controller is a modular device that can be configured to meet the motor control requirements of highly sophisticated industrial machines such as paper converting machines, metal forming machines, grinding machines, and lots more. This industrial controller contains a high metal content; this makes it very easy for the controller to be easily recycled once its usefulness a drive controller has been exhausted. The modular design of this industrial controller makes it easy for faulty components of the controller to be easily replaced without the need for the reconfiguration of the whole controller.

Under appropriate operating conditions, the CSH01.1C-ET-EN1-NNN-NNN-S2-S-NN-FW industrial controller can maintain efficiency as high as 90 percent without breaking down; however, for this high efficiency to be maintained, industrial operators must ensure that the controller operates according to the instructions stated by Rexroth Indramat in the documentation of the device. The CSH01.1C-ET-EN1-NNN-NNN-S2-S-NN-FW industrial controller does not generate a high amount of heat during operation; this makes it possible for the little heat it generates to be easily kept within a permissible range by natural convection. This industrial controller belongs to the C3 product category; this means that its operation can only be supported by the high electrical voltage supplied to industrial areas.

The CSH01.1C-ET-EN1-NNN-NNN-S2-S-NN-FW controller is also free of dangerous chemicals such as silicon, asbestos, and PCB. This controller is about 241 millimeters long, 103 millimeters wide, and about 49.5 millimeters thick. The controller also contains a multi-ethernet communication interface which consumes about 2.2 watts of electrical power during operation.