Product Description

The Rexroth IndraDrive platform from Bosch Rexroth consists of several components such as supply units, firmware, additional components, power sections, motor and control sections. The CSH01.1C-ET-EN1-EN2-MEM-S2-S-NN-FW is an advanced control section in the IndraDrive platform that is best used with HCS 02, 03, and HMS drive control units. Its compatible firmware is the MPH type.

The CSH01.1C-ET-EN1-EN2-MEM-S2-S-NN-FW is configurable, and it comes with one (1) configuration slot for safety technology. It is not compatible with the VCP01.2 comfort control panel but utilizes a standard control panel. With the standard control panel, it is possible to view error memory, configure analog outputs, adjust Fieldbus transmission rate, etc. Its current control cycle time is 62.5 microseconds, and its velocity control has a cycle time of 125 microseconds. The power consumption of the circuit board on the CSH01.1C-ET-EN1-EN2-MEM-S2-S-NN-FW is 7.5 kW, and its typical inrush current has a value of 4 Amperes. In addition, this unit can function at variable pulse frequencies, and its peak pulse width is 100 ms.

It utilizes a PROFInet IO master communication and has three (3) options for supplementary modules. Option 1 is the HSF/RSF Encoder at slot X4 with a power consumption of 6 Watts, option 2 is the TTL/1Vpp/EnDat 2.1 Encoder at slot X8 with a power consumption of 6 Watts, and option 3 is the Encoder emulator at slot X10 with a power consumption of 2 Watts. In addition, the CSH01.1C-ET-EN1-EN2-MEM-S2-S-NN-FW is equipped with safety technology. It uses a fiber optic cable as an accessory to establish SERCOS interface connections. This unit may only be engaged under the manufacturer-specified assembly, installation, and operating conditions for safe operations.