Product Description

The CSH01.1C-CO-ENS-NNN-MD1-NN-S-NN-FW is a new generation industrial drive controller designed by Rexroth Indramat to control industrial motors used in industrial production systems. This device is very flexible in its operation; it can meet the motor control requirements of various sophisticated industrial machines such as food production machines, paper processing machines, metal forming machines, and lots more. This controller features a power section and a control section which have to be connected to each other before the controller can be operated; as a rule, the control section should not be mounted and dismounted from the power section more than 20 times as this can cause permanent damage to the industrial drive controller.

The CSH01.1C-CO-ENS-NNN-MD1-NN-S-NN-FW industrial drive controller has been designed to carry out single-axis and multi-axis control in the industrial servo system; this drive controller also connects to various sensors and actuators through which the controller receives digital information requires to monitor and adjust the operation of the industrial electronic motors in real-time. This controller also generates radio interference during operation; thus, industrial operators should install the device with special radio interference suppression devices. The CSH01.1C-CO-ENS-NNN-MD1-NN-S-NN-FW requires a 24-volts power supply module for optimum operation; the power consumed by the controller during continuous operation is about 7.5 watts, while the typical inrush current is 4 Amperes. This drive controller also features to a digital input-output extension and an SSI encoder evaluation module.

During operation, the heat generated by the CSH01.1C-CO-ENS-NNN-MD1-NN-S-NN-FW industrial converter is regulated by natural convection; it is thus important for the industrial operator to ensure the controller is installed in a position that will expose it to cool air. The maximum permissible height at which this controller can be installed is 1000 meters above sea level.