Product Description

The CSH01.1C-CO-ENS-NNN-MD1-L2-S-NN-FW is a state-of-the-art control device produced by Rexroth Indramat to carry out automation control in servo systems. This industrial drive controller is manufactured by well-trained engineers under ideal manufacturing conditions. Before this controller is supplied to the operator, it is tested and certified to operate exactly according to the technical data present in its documentation. The CSH01.1C-CO-ENS-NNN-MD1-L2-S-NN-FW industrial drive controller is also flexible in its operation as it can meet the motor control requirements of different industrial machines such as paper processing machines, metal forming machines, hoisting machines, and lots more. To protect the integrity and ensure a safe operation of this controller, operators should ensure the installation, configuration, and general operation of the controller is carried out according to the configurational parameters stated in the documentation of the controller.

The CSH01.1C-CO-ENS-NNN-MD1-L2-S-NN-FW industrial drive controller does not generate a high amount of heat during operation; the little heat it generates is effectively controlled via natural convection; thus, operators should ensure the controller is installed in a position that exposes it to cool air. The typical inrush current of this industrial drive controller is about 4 amperes, while the maximum pulse width is about 100 milliseconds.

Although the CSH01.1C-CO-ENS-NNN-MD1-L2-S-NN-FW industrial drive controller is specially structured to allow for the easy dissipation of internal heat and to prevent rapid overheating, it can still be exposed to the risk of rapid overheating if it is operated at an ambient temperature that exceeds 45 degrees celsius. The CSH01.1C-CO-ENS-NNN-MD1-L2-S-NN-FW industrial drive controller generates about 3.5 milliamperes of leakage current during operation, thus to prevent electrical accidents, it should be properly grounded before operation.