Product Description

The CSH01.1C-CO-ENS-EN2-NNN-S2-S-XP-FW advanced control section manufactured by Bosch Rexroth is an integral part of a drive controller. The product must always be installed and used as per the specifications highlighted in the associated documentation. This device encompasses a configuration option. The unit makes use of a CANopen/DeviceNet interface for master communication. Its X10 connector does not house any Option module. The X31 and X32 connecting points of this control section are reserved for its digital and analog inputs or outputs. The digital inputs and outputs need external supply voltage for operation. The I1 and I2 digital inputs present in this product can be configured to function as probes.

The standard control panel on this device is present on the front. The unit also features an XP design. It supports a RS 232 serial interface connection. This control section is equipped with 2kHz, 4kHz, 8kHz, 12kHz and 16kHz switching frequencies. The product is integrated with 1 Normally Open relay contact. The device comprises seven combined I/Os that can be configured as either a digital output or as a digital input. The drive controller in which the unit is mounted is used to control and monitor the operation of the manufacturer’s motor. This CSH01.1C-CO-ENS-EN2-NNN-S2-S-XP-FW section is available with a one-year warranty.

The product must be installed only by trained and qualified personnel. The X41 connector of the device comprises the SIL2 Safe Motion option module. The unit encompasses one analog input as well as two analog outputs. Its digital inputs have a 24V voltage rating and 3mA current rating. These inputs are meant to be connected to its X31 connector. The section depicts current control, velocity control as well as position control. The analog inputs of this product can function as voltage inputs. The device has a separate slot for the memory card. The control section is dispatched in custom military-grade packaging.