COVID-19 Update: Wake Industrial is open and available to support your automation needs.
CLM axis positioning controls are among Indramat's products which are basically produced to be used in equipment for motion control applications. These controls offer the users improved safety as well as reliability while at the same time reducing the downtime of vessels, overall weight of the vessels, workload of the operators, and the complexity of wiring. The CLM controls are also able to carry out rotary or linear operations for each of their axes. Most applications usually use the linear programming method.
Other applications may need special features that are allowed by the rotary method of programming. The linear method of programming permits every axis a maximum as well as minimum software over-travel limits. With the CLM axis positioning controls, it is easy to program motions in any input units type e.g. degrees, inches, etc. The rotary operation permits every axis a motion capability of 360 degrees. The actual position on the LP screen counts starting from zero degrees to the Ax08's set value and resets back to 0 degrees after every completed revolution of 360 degrees. Furthermore, the CLM controls are designed to ensure safety and integrity during operation using several inputs as well as outputs.
The FWA-CLM1.4-LA1-01VRS-MS firmware unit for CLM axis positioning controls has RS-232/422/485 interface options which permit data transfer and remote operation. This control as well has a height, width, and depth of 390 mm, 105 mm, and 325 mm respectively. Additionally, this axis positioning control weighs 6 Kg and is cooled through the cooling convection technology. The FWA-CLM1.4-LA1-01VRS-MS firmware control is protected according to the IP 10 protection system. The operating environment temperature of this CLM control should range between 41 and 113 degrees Fahrenheit. The allowable transport and storage temperature for this control should be about -22 to 185 degrees Fahrenheit. The maximum operating altitude of this control at rated values is 3280 ft.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved