Product Description

The CLM01.3-X-0-1-B-FW is a single axis positioning controller by Rexroth Indramat. The design of this product is 3, and it is in the product line 1. The design of CLM axis position control devices enable them to ensure the safety and integrity of industrial operating conditions by utilizing several I/Os for handshaking and the harmonization of devices and their respective operations. The CLM01.3-X-0-1-B-FW is easy to operate, and it provides superior and precise motion control with a feed resolution of about 0.001 inch. The adaptability of the CLM01.3-X-0-1-B-FW is top-notch as it can be parameterized based on the electrical and mechanical characteristics of the desired application.

It is only compatible with the software type M and features only one axis (standard I/O and flying shear). The display of the CLM01.3-X-0-1-B-FW is B, has integrated backlight and can be mounted away from the cabinet housing (up to 2 meters). The LCD screen of the CLM series can be utilized in the parameter mode or the Automatic/Manual mode. When in parameter mode, the data corresponding to each parameter set can be edited, viewed, or entered. In Automatic/ Manual mode, the screen of CLM devices display status messages, control software version, equipment faults and output and input status.

The performance specification of the CLM01.3-X-0-1-B-F  varies with the mechanical limitations of the CLM. With adequate cooling, the maximum mounting altitude of the CLM01.3-X-0-1-B-FW is 1000 meters (3,280 ft). The protection system of this equipment is IP 10. During storage/transportation, the prevalent temperature should be maintained within -30 … 85 ^o C. Also, the acceptable operating temperature range is between 5 degrees Celsius to 45 degrees Celsius.