Product Description

The CLM 01.3-M-0-1-0 flying cutoff control is manufactured by Bosch Rexroth. This control features a microprocessor-based positioning. The product is used in single or dual-axis flying cutoff applications. The device features a wide program command-set that helps in performing complex tasks. The flying cutoff system comprises a flying cutoff control, a TVM series power supply, a MAC series AC servomotor, and a servo amplifier of the TDM series. It also encompasses an interconnect cable set and a measuring wheel with an incremental encoder. The unit is equipped with 32 inputs and 32 outputs. The CLM 01.3-M-0-1-0  is supported by a one-year warranty.

This flying cutoff control features a keypad for entering the system program and parameters. The user program of the product defines the minimum cut point. This is the point at which cutoff takes place in the cycle. The device also comes with a liquid control display for highlighting the diagnostics fault conditions and operating status. It supports a quick and easy setup process that helps in saving time associated with the mechanical setup process. The LM software has three operation modes comprising manual, automatic, test, and parameter entry. The unit operates between an ambient temperature range of 5°C to 45°C.

The product has an IP 10 degree of protection. This device can be mounted inside a NEMA 4 or a NEMA 12 control cabinet. Its front panel features two sections. The upper section incorporates the keypad and display modules whereas the lower section comprises the X7 and X5 connectors as well as other components. The unit H1 green LED ready indicator specifies that the control is turned ON and that there is no system error. The intermediate stop input is connected to a pushbutton switch on the user control panel. The flying cutoff control can be sent in custom military-grade foam packaging to your address.