Product Description

The CDB02.1B-ET-EC-EC-PB-S4-S4-EM-NN-FW is a series 02 CDB BASIC double-axis control section with a type 1 design. This equipment features an extended scope, two (2) multi-encoder interfaces, a PROFIBUS interface, and two (2) safe motion safety technology modules. It is equipped with a standard panel for control features, and its firmware must be obtained as a separate item. The CDB02.1B-ET-EC-EC-PB-S4-S4-EM-NN-FW has several use cases in different fields, and it also has an encoder emulation interface. Its standard control panel is the HAP01.1N, with 400 KB memory for MLD boot program and 492 B to retain MLD variables. The display also comes with 4 keys used to trigger simple operating commands.

The CDB02.1B-ET-EC-EC-PB-S4-S4-EM-NN-FW stands the risk of damage by electrostatic charges, and for this reason, it must be kept away from the vicinity of conductive parts that are yet to be grounded and discharged.

In order to preserve the reliability of the CDB02.1B-ET-EC-EC-PB-S4-S4-EM-NN-FW BASIC control section and to prevent it from improper handling, it must only be set up and unmounted by trained and certified personnel. It is recommended that control sections are stored and dispatched in conductive packaging materials. The plug-in action of the CDB02.1B-ET-EC-EC-PB-S4-S4-EM-NN-FW is limited to 20; in other words, it must not be assembled and disassembled more than 20 times. The design of this unit is such that it is not permitted for use on low-voltage general-purpose grids for residential areas due to the possibility of high-frequency interferences. If such scenarios are unavoidable, additional interference suppression will be required. The CDB02.1B-ET-EC-EC-PB-S4-S4-EM-NN-FW may be unfit for use under operating conditions that deviate from those specified by Bosch Rexroth, especially high-temperature fluctuations and submerged applications. This product can be shipped globally with a one year warranty period from Wake Industrial.