Product Description

The CDB01.1C-SE-EN1-EN1-NNN-NNN-L1-S-NN-FW control section has two EN1 optional modules that have separate pairs of differential inputs for HSF and RSF evaluation. This Bosch Rexroth control section comes with a starting lockout that is in compliance with stop category 0 as per EN 60204-1 specifications. This lockout option does not support bus wiring. The two-axis product can be connected and removed a maximum of 20 times to and from the power section. This device may get damaged due to contact with any type of exposed conductive parts. The unit is not designed to be utilized in a damaged or defective state. Its operation must be performed only in its original state without any hardware modification.

The product is designed for operation in industrial networks. This basic universal device must be worked on only by qualified personnel. Its connectors must neither be connected nor removed during operation. The unit tends to have a high working current and high electric voltage due to improper operation. The section has to be subject to operation only after permanent connection of its equipment grounding conductor as per the connection diagram. This product is intended to be mounted and installed inside a control cabinet and secured against penetration of water.

The device is meant to be operated as far away as possible from remote control and high-frequency and radio equipment. The unit requires a cooling time of at least 15 minutes before it is touched after turning it OFF. Its transportation is to be done using suitable lifting equipment and tools. The type plate of the section helps to procure spare parts when there is a failure of its components. The product has three switching frequencies. This device can use a multimedia card with loaded firmware or a preformatted card for easy parameters transmission. The section is associated with a warranty period of one year. It is shipped in custom military-grade packaging.