Product Description

Bosch Rexroth is a global pioneer in sophisticated industrial automation component manufacturing and repair. The firm is well-known for producing high-quality industrial equipment such as control sections, frequency converters, drive converters, drive inverters, and brake choppers.

The CDB01.1C-S3-ENS-ENS-NNN-NNN-L1-S-NN-FW model with options 1 and 2 indraDyn/hiperface encoders, a standard control panel, and a SERCOS 3 communication module is highly effective and efficient. Rexroth drive controllers are at the bleeding edge of technology and manufacturing, and they are rigorously tested before being sent to ensure operating safety and dependability. The CDB01.1 control section comprises 18 to 22 digital inputs and a safety feature called L1 (starting lockout). The cycle time function allows for velocity control between 250 and 500 milliseconds, current control between 125 and 500 milliseconds, and position control between 250 and 500 milliseconds. The model features a Serial interface RS232 with a transmission time of 500-1000 microseconds. The device requires 9 watts of power and has a 6-amp inrush current and has a minimum SERCOS cycle period of 1000 milliseconds. When powered by a 24-volt DC power source, the CDB01.1 control section has a maximum pulse width of 60 milliseconds, and the firmware must be bought separately. A single analog input and two analog outputs are included in the model.

The model CDB01.1C-S3-ENS-ENS-NNN-NNN-L1-S-NN-FW contains four digital outputs that may be customized, one relay contact, and two probe slots. The model is made out of stranded wire with a diameter of 0.75 to 1.50 mm and has a basic universal characteristic. The control section (CDB01.1C-S3-ENS-ENS-NNN-NNN-L1-S-NN-FW) was built for industrial use and should only be used according to the instructions. Events regarding property damage and personal injury may arise if they are not used properly. This product can be shipped globally with a one year warranty period from Wake Industrial.