The BTV30.2CA-24R-55C-E-FW is optimally produced by Rexroth Indramat. This efficient machine control terminal is designed to be used in combination with multiple NC units with SPS and can also be paired with more than one stand-alone logic device. Nine accessible modules are built into the BTV30.2CA-24R-55C-E-FW. These modules can be customized to fit the manufacturer’s needs. Additionally, the BTV30.2CA-24R-55C-E-FW is just as capable in its capabilities as any industry computer.
A 10.4 flat display, ASC11 keyboard, and floppy disk port are standard issue with the BTV30.2CA-24R-55C-E-FW in addition to a keyboard mouse. An additional external keyboard can also be used with the machine control unit. PC/ABS is used to protect the outer portion of the device from probably damage that the device may receive. This material is resistant to the chemicals that the BTV30.2CA-24R-55C-E-FW will likely come in contact with. The display of the BTV30.2CA-24R-55C-E-FW is protected with glass that satisfies EMC requirements. The machine control terminal can be fastened or mounted in a myriad different ways and can be paired with BTM15 and BTM16 control panels.
The software that is installed on the BTV30.2CA-24R-55C-E-FW is done so before delivery due to licensing responsibilities. Manufacturers can also request that a MTC200 CNC controller or an ISP200 logic controller can also be fitted on the BTV30.2CA-24R-55C-E-FW prior to delivery.
Rotary units, machining centers, and other large factory machines typically surround a central control terminal. There are some instances that require multiple control positions in order for a machine to operate at its full capacity. The BTV30.2CA-24R-55C-E-FW can be used to assist in the operation machines with multiple control positions. A primary BTV can be paired with the BTV30.2CA-24R-55C-E-FW though it does not possess its own PC or hard drive. A receiver device is installed in the BTV30.2CA-24R-55C-E-FW. Because of this, once any adjustments are made to one point in the data, the change will take immediate affect in all control positions.
|Disk Drive:||Factory Assigned|
|Function Mode:||MTC (export certificate is mandatory)|
|Keyboard:||American (US) for BOF|
|Memory Capacity (RAM):||Factory Assigned|
|Machine Function Keys:||8 Machine function keys, equipped on the right|
|System Configuration:||Factory Assigned|
|Nominal Connecting Voltage:||AC 115 to 230 V, 50 to 60 Hz|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved