The BTV20.2CA-64B-33C-D-FW is a machine operator panel engineered by Rexroth Indramat. This optimal operating panel can be used with a wide array of NC controllers with PLC or a variety of stand-alone PLC controllers. BTV20.2CA-64B-33C-D-FW includes eight distinct modules and features a 4mm front panel with narrowed edges and key switch safety components. Further, the buttons on the BTV20.2CA-64B-33C-D-FW incorporate intermediate fillets to protect against multiple or accidental key commands.
The BTV20.2CA-64B-33C-D-FW features a variety of useful modules including a 10/100 MBIt Ethernet-Card PCM-E02.1, CNC module, and PLC module. Profibus software is preinstalled on these modules. The BTV20.2CA-64B-33C-D-FW also includes an operating system that is preinstalled on the device at the time that it is delivered. Specific computer software for a MTC200 CNC unit or an ISP200 PLC device can be downloaded and installed on the device before arrival if needed. The BTV20.2CA-64B-33C-D-FW is primarily used to control a separate, stand-alone machine and to visualize its internal operations. These apparatuses are generally lathes, milling and grinding machines, or machine centers.
The BTV20.2CA-64B-33C-D-FW may only be utilized in explicit temperature and humidity settings as outlined in the operating instructions. Additionally, the manual and the included directions should be examined before the operation and proper installation of the machine operator panel. The BTV20.2CA-64B-33C-D-FW must solely be used with accessories or other devices that are compatible with the unit. Pairing the BTV20.2CA-64B-33C-D-FW with unsuited accessories is not permitted to protect the integrity of the device. Only certified and trained operators should use the device to evade bodily harm, injury, or death as a result of the BTV20.2CA-64B-33C-D-FW not being used properly. Individuals who control the panel should familiarize themselves with how the device operates and how to install the BTV20.2CA-64B-33C-D-FW correctly.
|Disk Drive:||Disk drive 3.5, 1.44 MB mounted|
|Function Mode:||MTC (export certificate is mandatory)|
|Memory Capacity (RAM):||64 MB|
|Machine Function Keys:||16 Machine function keys, on both sides right and left|
|System Configuration:||min. 3 GB, min. 300 MHz, RS485 (SIS)|
|Nominal Connecting Voltage:||AC 115 to 230 V, 50 to 60 Hz|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved