Product Description

The CZM01.1-01-07 Bosch Rexroth auxiliary capacitance module operates with the DKC range of drive controllers by the manufacturer. This module is housed inside a control cabinet along with the drive controller. It is operated when the controller has more than 0.15kW continuous regenerative power while the energy content of the drive system is below 200W. The device assists in lowering the power dissipation of the control cabinet by the continuous regenerative power value. The minimum and maximum cross-sections of the wire used for its DC bus connection are 0.2mm² and 4mm². The unit can be delivered worldwide through a wide range of freight carriers.

The auxiliary module helps in storing the rotary energy generated as a result of the braking action of the connected drive. This energy present in the module can be used for other acceleration procedures in the future. The product is characterized by a 1 version code and a 01 series code. The device supports a rated capacity of 1mF. The installation of the unit should be performed at a distance of 70mm from the drive controller. Its X9 connector and protective conductor connection are located close to each other at the bottom of the front panel. The device has a rating plate attached to it that encompasses details such as a barcode, part number, type of machine, and change index.

The product must have a minimum of 80mm clearance at the top and bottom of the control cabinet in which it is installed. The X9 connector of the unit is a plug-in screw terminal that supports wires with AWG 20-14 size. It comes with a 700V DC bus nominal voltage. The device has dimensions of 233 x 210 x 333mm. This product belongs to the CZM series of such auxiliary modules. The CZM01.1-01-07 capacitance module is available with a warranty for one year from Wake Industrial.