Product Description

The B&R 5AP923.1505-01 is an industrial panel with a 15-inch single-touch display. B&R also manufactures multi-touch panels for industrial applications. A complete automation panel is comprised of a link module and a compatible automation panel. The link module cannot operate without a panel. The link module features various network connections and graphics interfaces. Weight of the panel is 3.7 kilograms. Dimensions of the cutout required for panel installation are 359 x 277 millimeters. Dimensions of the 5AP923.1505-01 panel are 370 x 288 millimeters. The display uses TFT technology and supports 16.7 million colors. The supported resolution is XGA and the contrast ratio is 700:1. Protection class of front part of the 5AP923.1505-01 is IP65. Protection category of the back of the panel is IP20. The maximum specified ambient temperature for operation were determined under worst-case conditions.

Experience has shown that higher ambient temperatures can be achieved in typical applications. The minimum ambient temperature for non-condensing operation is 0 degrees Celsius. The minimum and maximum temperatures for storage and transport are -25 degrees Celsius and 80 degrees Celsius respectively. The minimum and maximum relative humidity for operation are 8% and 90% respectively. At the time of delivery, operators should check the packaging for any visible transport damage. Any visible transport damage must be documented and reported immediately. All power supplies should be disconnected before removal of device covers or components and installation/removal of accessories, hardware or cables. The power cable must be disconnected from the device and from the power supply. All covers, components, accessories, hardware and cables must be installed or connected before the device can be connected to the power supply and turned on.