Product Description

The B&R 8V1022.001-2 is an ACOPOS series servo drive. It operates at three-phase AC input at 400 to 480 Volts AC. The nominal output current rating is 2.2 Amps and the output power rating is 1 kilowatt. Drive features includes a line filter, integrated braking resistor and electronic secure restart inhibit. The integrated line filter complies with EN 61800-3. The 8V1022.001-2 is a drive variant with partially coated circuit boards. It has four slots for plug in modules. The 8V1022.001-2 certified by CE, KC, FSC, and cULus. The supported line frequencies are 50/60 Hertz with 4% allowed tolerance. The maximum installed load is 4 kVA. The switch-on interval is greater than 10 seconds. The maximum power loss without braking resistor is approximately 120 Watts. Capacitance of the drive DC bus is 235 microfarads.

The holding brake on the 8V1022.001-2 requires an external 24 Volts DC power supply. The input capacitance of the DC input is 8200 microfarads. The power consumption is maximum 2.5 Amps plus the current drawn by the holding brake. The 8V1022.001-2 supports connection to one motor. The continuous output current can experience a reduction depending on the ambient temperature and switching frequency. At 480 Volts AC input, 20 kilohertz switching frequency and ambient temperature 51 degrees Celsius, the output current reduces by 0.12 Amps per degree Celsius increase. Peak current output of the 8V1022.001-2 is 14 Amps. Value of the nominal switching frequency is 20 kilohertz. The supported switching frequencies are 5, 10 and 20 kilohertz. Maximum length of the motor line is 25 meters. The drive supports overload protection, and short circuit and ground-fault protection. The peak output frequency is 600 Hertz.