Product Description

The CP3219-0010 from Beckhoff Automation GmbH is one of the several panel PCs with a multi-touchdisplay. The system houses a 3.5-inch motherboard, an onboard SATA RAID 1 controller and an onboard dual-Ethernet adapter. This device also has a graphic adapter that is integrated within the Intel processor. The mounting arm has a 48mm diameter tube connected from the top. The wiring used to connect the power supply must have a cable cross-section of 1.0mm². The anti-twist safeguard on the mounting arm adapter prevents damage to the connecting cables and over winding the product. The unit can be shipped worldwide with our partners like FedEx.

The 19-inch TFT display has a screen resolution of 1280 x 1024. The mounting arm adapter can be used to rotate the panel PC at an angle of +/-165° and tilt it an angle of +/-20°. The locating screw must be tightened using the star knob to prevent the panel PC from getting distorted. The device should be positioned in such a way that there is no reflection on the screen as far as possible. It must also be ensured that the device is not exposed to direct sunlight. The mounting arm has to be moved into the adapter all the way to the stop.

The CP3219-0010 control will operate incorrectly even though the system boots and the software starts if there is a fault in the software. The CE Certified product has a power consumption of nearly 67W. The connectors and the hard disk of the device can be accessed only if its cover is removed by unscrewing the four screws using a Torx size 10 star screwdriver. The components of the product are prone to damage from strong impacts and vibrations. If there is condensation on the system, it should be switched on only after 12 hours. The panel PC is backed up by a one-year warranty period.