Product Description

Just like many of the other top notch products of Danfoss the VLT205175X0632 is carefully designed to meet control drives and motors requirements of the clients. It contains high voltage when it is connected to AC mains input, load sharing or DC power supply. In case of the failure to perform installation, it can cause serious injury.

 When compared with the other control system technologies, the VLT205175X0632 is designed for optimum energy control system for controlling pump and fan systems. If you use the VLT205175X0632 in an application, you can save up to 50% of the energy in case the pump speed is reduced to 20%. The pump speed is often measure in RPM. The flow is directly proportional to speed, so if you reduce speed by 20%, then the flow can be decreased to 20%.While operating a motor that uses the VLT205175X0632, it is important to limit the start-up current.  The frequency converter regulates AC power to motor to control its speed. The frequency converter is often divided to four main modules which include control & regulations, inverter, intermediate DC bus circuit and rectifier.

It has the main input that ensures 3-phase AC mains power supply to the frequency converter and the rectifier bridge converts AC input to DC current to supply inverter power. The VLT205175X0632 is professionally designed for the wastewater and water applications. The product operates perfectly with the motors having following standard and optional features:

• Cascade control
• Dry-run detection
• End of curve detection
• Motor alternation
• Deragging
• Initial and final ramp
• Pipe fill mode
• Sleep mode
• Real-time clock
• Check valve ramp
• STO
• Low-flow detection
• Pre lube
• Password protection
• Overload protection
• Smart logic control
• Minimum speed monitor
• Flow confirmation
• Free programmable texts for information, warnings and alerts