Product Description

The Bosch Rexroth MSK100C-0450-NN-S1-AG0-NNNN synchronous servomotor has a standard design. This motor can have dust accumulation on its surface over time when it is operated in an explosive dust atmosphere. The product might not have sufficient cooling due to the accumulated dust. The device comes equipped with a Hiperface interface encoder. The unit uses this encoder as a replacement for an incremental encoder. It has a Level A vibration severity grade according to EN 60034-15 specifications. The motor speed and position are controlled by the controller with the help of the encoder. This product has a cable connector for its electrical connection directed to the A-side.

The device features changed thermal coupling if transmissions are attached to it. The unit must utilize the manufacturer’s connection cables for commissioning as well as fast and simple fail-safe commissioning and installation. Its connection cables must not feature torsion or tension. The motor installation has to be done at 0m to 1000m over sea level in compliance with EN 60034- 1 specifications. The product has low absolute air humidity of 1g/m³. This device features a maximum 10m/s² permitted vibration load between 10Hz and 2000Hz frequency. The unit has protection against penetration of dust and a jet of water.

The motor installation is permissible in any orientation. The product permits vertical installation with the shaft facing either upward or downward. The device utilizes clamping sleeves or tensioning elements to couple the machine elements with the shaft. The unit encounters premature bearing failure if its grease lifetime reduces. Its shaft has a very quiet running action. The motor shaft sealing ring must not make permanent contact with gearbox oil. The product might encounter an unacceptably high load on its bearings and shaft when extremely rigid couplings are mounted. This servomotor has backup support from Wake Industrial for a year and is transported through carriers like FedEx and DHL.