Product Description

The MKD112C-024-KP3-AN synchronous digital motor features peak torque that can be used over a wide speed range because of its electronic commutation. This Bosch Rexroth motor can be easily attached to any industrial machinery as it has a flange that is designed according to DIN 42948 specifications. This product comprises a data memory in its encoder that makes the startup process simple and quick. The device depicts a thermal time constant of 90 minutes. It must be stored and transported between -20°C and 80°C. The rotor has an inertia of 273 x 10^-4 kgm². The motor has a winding resistance of 0.44 Ohms at 20°C.

This device should not be used when there is extreme temperature fluctuation. The product must not be installed in high frequency, nuclear, and medical applications. The housing of the unit should be permanently connected at the ground points with the safety conductor before its power supply is switched ON. The emergency stop switch of the connected drives must be connected at a point that is easily accessible. These drives should be in standstill mode before entering the danger zone. The handling, transport, and mounting of this motor must be done correctly using the appropriate equipment.

The product features a rated current of 8.2A and a rated voltage of 372V when it operates at 60K and is cooled through natural convection. The prime coat of the standard-design device is resistant to diluted lyes and acids, chalking, and coloring. The torque rating of the unit is reduced by 15% to 20% when the unit is unpainted for use in the food industry. It is fitted with an electrically-releasing 70Nm holding brake. The motor must be protected from the penetration of fluids into the output shaft when it is installed with the drive-side pointing upwards. The synchronous motor can be sent to your address through a reliable logistics network with a one-year Wake Industrial warranty.