Product Description

The MDD071C-N-030-N2S-095GB0 digital AC servomotor produced by Bosch Rexroth features a C length code. This servomotor is associated with a short construction. The product is balanced with a reduced balance class. The product comprises power and feedback connections for the electrical connections. This device comes equipped with an integrated temperature sensor in the windings. The unit features digital servo feedback. Its power connector is directed to B side. This motor feedback has an optical system measuring principle as well as a system accuracy of +/-0.5 angular minutes. The product transportation plus storage should take place at a temperature ranging between -20°C and 80°C.

This device uses either an INS 512 straight connector or an INS 513 straight connector for feedback. The unit tends to become very hot during and soon after the operation phase. Its wiring must be done as per the terminal diagrams of the machine manufacturer. This motor is known to have high power density. The product is ideal for operation in tool-changing equipment. This device uses materials like iron oxide or rare earth magnetic materials for its permanent magnets. The unit is categorized without the inclusion of a blocking brake. Its shaft is attached to the rotor. This MDD071C-N-030-N2S-095GB0 AC motor depicts one-year backup support.

The motor installation can be accomplished in any orientation. This product has flanged sockets on its housing for the connectors. The device has lesser than normal output when the installation altitude above sea level exceeds 1000m. This unit has an IP 44 protection rating when a blower is attached. Its housing supports an additional paint layer of thickness up to 40µm. The motor coat is likely to start peeling if it is cleaned quite often with a steam cleaner. This product supports the inclusion of pressure sleeves on its shaft for coupling pinions. This AC servomotor shipment takes place worldwide.