Product Description

The MDD065D-N-040-N2L-095PA1 digital AC servomotor from Bosch Rexroth operates in conjunction with a drive controller. This servomotor and the drive controller together render a cost-effective automatization system. The product belongs to the MDD product group of such offerings. This device encompasses two sets of windings. The unit portrays a high degree of operational reliability. It has an output shaft with a keyway as per DIN 6885 specifications and a 3Nm blocking brake. This motor has separate flanged sockets with connectors for the power and feedback connections. The product is designed to operate at an ambient temperature between 0°C and 45°C.

This device is protected by its covers and housing that adhere to the DIN 40 050 guidelines for their construction and design. The unit has up to 0.3mm excursion amplitude for its longitudinal axis with sinusoidal oscillations. It incorporates no general or standard solution for shock-damped mounting. This motor has 2.7Nm continuous torque in standstill mode with natural convection cooling mode. The product mounting can be done in various orientations as per DIN IEC 34-7 specifications. This device achieves form-fitting transmission of torque with the output shaft. The unit encounters both axial and radial forces during its operation. This MDD065D-N-040-N2L-095PA1 servomotor features a one-year warranty.

The motor is affected by thermal deformations in length on the A side during operation. It is possible to fit a blower to support surface cooling. This product makes use of its blocking brake for the backlash-free holding of its servo axes when the machine is turned off. The device is to be reseated before use when its storage period is over two years. This unit has reduced balance class in accordance with DIN VDE 0530 specifications. It uses a straight connector or an angle connector for feedback based on its installation. The motor’s electrical connections include power, feedback and blower connections. This servomotor is shipped globally.