Product Description

The Bosch MDD065B-N-040-N2L-095GB1 is a servo motor. It is made with permanent magnets and supports electronic commutation. The main components that make up the motor include a laminated core with permanent magnets, motor windings, an optional blocking brake, an encoder, an output shaft. The motor has a standard housing that is fully sealed. The connectors for the power and feedback cable are also fully sealed. The IP65 rating for the motor indicates that motor is fully dustproof and is also safe form low pressure water jets. The default cooling mode is convection cooling. The continuous output torque and current with natural convection are 1.5 Nm and 3.5 Amps. Installation of an axial blower allows motor use with surface cooling. The continuous output torque and current with surface cooling are 1.7 Nm and 4 Amps.

Nominal speed rating of the MDD065B-N-040-N2L-095GB1 motor is 4000 RPM. The motor supports digital servo feedback. This feature allows use of the motor with a compatible servo controller that controls motor speed and position. The motor has a plain output shaft. An optional blocking brake rated for 3 Nm holding torque is also available. Voltage rating and current raw of the blocking brake are 24 Volts DC and 0.6 Amps. The release delay and clamping delay are 30 milliseconds and 15 milliseconds. Approximate weight of the brake is 0.55 kilograms. Shipping weight of the MDD065B-N-040-N2L-095GB1 motor is 3.9 kilograms. The combined of the motor and blocking brake is 4.45 kilograms. The motor has a centering diameter of 95 millimeters. The main power connection is located on side B of the housing. Only qualified technical personnel should install and operate the motor.