Product Description

The HNF01.1A-F240-R0065 is a mains filter used in drive controllers along with power converters. The filter is UL Listed and CSA Certified. It has a nominal current rating of 65A. The device can be used with six-axis drive controllers. The maximum length used to connect the drive controller is 240m. The product has a power dissipation of 163W. There must be an isolating transformer between the unit and the mains when the filter is used at the grounded mains through an external conductor. The device should be mounted in the normal orientation. There must be a minimum of 80mm free space at the top and bottom of the device. This space should be free from mounted parts.

The mains filter has a tolerance of +/-10% and a tolerance input frequency of +/-2Hz. The device features a maximum allowed peak current of 163A. It does not support three-phase mains voltage at IT and corner-grounded-delta mains. The device can be used with up to 12 drives at a time. The drive controller that incorporates the filter supports operation with asynchronous servomotors from the manufacturer. The input terminals have a maximum connection cross-section of AWG 4 or 25mm² and maximum tightening torque of 4.5Nm. The unit has a type-plate that highlights its key specifications. The HNF01.1A-F240-R0065 mains filter can be dispatched with a warranty for one year to any address worldwide through our shipping agents.

The mains filter is used by drives that make use of long motor cables. The mounting screws have a maximum tightening torque of 8.6Nm. Devices such as blowers and pumps should not be allowed to function at the filter. The unit should be mounted inside a control cabinet. Drive controllers featuring the mains filter can be connected using fiber optic cables.