Product Description

The HDS05.2-W300N-HS30-01-FW from Rexroth Indramat is a high-performance drive controller, with a variety of applications and use cases. The approx. weight of this HDS controller has a value of 25 kg. Generally, drives controllers in the HDS series are commonly utilized together with 1MB, 2AD, MHD and MKD AC motors. The HDS05.2-W300N-HS30-01-FW experiences a power loss rated at 1.2 kW when operated at a continuous current rating of 175 Amps (4 kHz) and 100 Amps (8 kHz).

The command comm. on this unit is the sophisticated SERCOS interface. The function ID of the HDS05.2-W300N-HS30-01-FW is of version 01, and its ID code is 30 as documented by the manufacturer. This unit can be utilized as application-specific equipment, depending on the parameters inputted into its firmware plug-in module. This model of the HDS series identifies with the DIAX04 family of digital controllers. The HDS05.2-W300N-HS30-01-FW controls/monitors the operating mechanism of corresponding electric motors via electrical impulses. It adopts an internal air-cooling method via a blower mounted in its cabinet housing. The peak current rating of this device is 300 Amps, and the value of its nominal current is also 300 Amps.

The HDS05.2-W300N-HS30-01-FW is not designed for under-water utilization, extremely high-temperature scenarios, and in regions with large fluctuations in temperature. If by any means, the HDS05.2-W300N-HS30-01-FW overshoots its rated data, load factors must be appropriately accounted for. When mounting and installing this intelligent HDS drive controller unit, the permissible mounting height is from 0m to a maximum of 1000 m above sea level. During operation, then environmental temperature must not exceed 45 degrees C, neither should it go lower than 5 degrees C. This unit can be shipped globally with a one-year warranty period from Wake Industrial.