Product Description

The HDS05.2-W300N-HS11-01-FW is a digitally intelligent HDS drive controller from Rexroth Indramat. It features a SERCOS communication interface with a DSS02.1M plugin-module. The plug-in module aids the generation of error messages in the drive, and it has a power consumption rated at 1.5 W. The HDS05.2-W300N-HS11-01-FW is a modularly structured drive controller and has a peak and rated current value of 300 A. The weight of this HDS drive controller is 25 kilograms and its recommended max. installation altitude without derating data is 1000 meters ASL.

As indicated by the DIN 40 050 standards, the degree of protection of the HDS05.2-W300N-HS11-01-FW is IP 10. Also, its insulation category is C. When installing this unit, the minimum recommended clearance below it is 100 mm. During the cooling cycle of this model, the cooling temperature must be maintained at 40 degrees C to prevent water condensation from reaching its electrical parts. Also, the control cabinet of the HDS05.2-W300N-HS11-01-FW must be sufficiently sealed to prevent the formation of condensates by humid air. The maximum cable length for this HDS drive controller model is 75 m, provided ambient temperature is less than 40 degrees C.

The connection between the HDS05.2-W300N-HS11-01-FW and its associated control is achieved with the aid of ready-made optic fibre. During storage, the ambient air must be free of dust and moisture. Also, this unit must be stored under shock-free conditions. The permissible storage/transport temperature range is between -30 to 85 degrees C. Components like plug-in modules that are susceptible to damage by electrostatic discharge must be transported/stored in conductive packages.  The HDS05.2-W300N-HS11-01-FW is intended for use only under the specified conditions. This unit can be shipped globally with a one-year warranty period from Wake Industrial.