HDS04.2-W200N-HS98-01-FW

  • Rated 4.3 (14 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS04.2-W200N-HS98-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 200A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! HDS04.2-W200N-HS98-01-FW | Rexroth, Bosch, Indramat HDS Drive Series | Image

HDS04.2-W200N-HS98-01-FW

  • Rated 4.3 (14 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS04.2-W200N-HS98-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 200A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS04.2-W200N-HS98-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HDS04.2-W200N-HS98-01-FW Bosch Rexroth drive controller is fitted onto its control cabinet using a mounting rail. The drive controller may become overheated due to incorrect mounting orientation resulting in its damage. There must be a clearance distance of at least 100mm below the unit. The power loss of the product comprises the basic losses, configuration-related losses, as well as the basic and current losses pertaining to the power section. The device must not be touched for ten minutes after its operation so that it cools down completely. It should be handled correctly and safely using appropriate lifting tools and devices.

The controller encompasses a power loss of 800W. The product is capable of operating at a maximum temperature of 55°C with derated data. The device is used in conjunction with the MKD, 2AD, 1MB and MHD series of AC motors by the same manufacturer. It incorporates an additional HZK capacitor module if there are a high number of start-stop cycles. The unit may have high voltage due to wrong connections. The product should be operated only if it meets the required national EMC regulations. This device must have its guards and covers properly fitted before it is turned ON so that there is no contact with live parts during operation. The controller features a one-year Wake Industrial warranty.

The drive controller has a leakage current of more than 3.5mA. The product should encompass a copper conductor of a minimum 10mm2 cross-section over the entire length for its protective connection. The device is likely to encounter dangerous movements at any point of time during operation. Its vertical axes must be secured mechanically against slipping or falling after turning OFF the motor. The electrical power to the unit must be disconnected during cleaning and maintenance work. This controller is available for global shipping to any country. This unit can be shipped globally with a one-year warranty period from Wake Industrial.

HDS04.2-W200N-HS98-01-FW Documents

  • HDS042W200NHS9801FW
  • hds04.2-w200n-hs98-01-fw
  • HDS04 2 W200N HS98 01 FW

HDS04.2-W200N-HS98-01-FW Technical Specifications

Rated Current: 200A
Cooling Type: Air, internal (with built-in blower)
Controller Family: DIAX04
Command Communication: SERCOS Interface
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo