Product Description

The HDS04.2-W200N-HS30-01-FW configured drive controller must be mounted in a closed housing or control cabinet in adherence to EN 50175/1988 specifications. The controller has a power loss of 800W with continuous current. The product belongs to the DIAX04 family of controllers. The cooling mechanism of the device is through internal air circulation. The command communication module used is of the plug-in type. The device uses a SERCOS interface for command communication. It has a function ID code of 30 with a version of 1. The firmware for the configured controller must be ordered separately. The unit can be sent to the address of your choice worldwide.

The slots present in the basic unit of the configured product are empty. The additional plug-in modules include digital I/O cards and interface cards. If any change is made to the configuration of the device, it must be reflected in the configuration type plate. This device has a continuous current rating of 120A at 4kHz. The product is intended for use with MKD, 2AD, 1MB and MHD series of motors from the manufacturer. It may be required to incorporate an additional HZK capacitor module if there are many start-stop cycles. The controller must be allowed to operate only if the application for which it is used complies with national EMC regulations.

The configured drive controller must not be used in elevators, construction cranes and refinery plants. The product must make use of only those accessories and parts that are approved by the manufacturer. The unit should not be used when there is extreme temperature fluctuation. It features a Class C insulation according to DIN VDE 0110 specifications. If the HDS04.2-W200N-HS30-01-FW device is operated at higher than the ambient temperature range, it must be ensured that the derated data adheres to the application requirement. The configured controller has a one-year warranty period.