Product Description

The HDS04.1-W200N-HS12-01-FW is a pre-configured, 200A drive controller. The basic unit incorporated in this drive controller package is the HDS04.1-W200N and it comes with a tendency to host as many as four plug-in modules. This model features a standard Serial Interface (X2). This serial port can be utilized for communications of the drive controller with a personal computer provided that there is suitable software installed on the host PC (such as DRIVETOP or SERCTOP).

 You can configure the device through its serial interface. Another way of achieving the desired configuration is the use of a pre-configured software module. You can swap different software modules across different drive controllers if required. The software module has onboard memory where all the drive parameters are stored. With this model, you will be able to achieve the desired configuration by choosing from an extensive range of plug-in modules. For controlling your drive controller through a PLC you can use digital I/O card. A broad range of measurement modules is also available to be used with the HDS04.1-W200N-HS12-01-FW.

This drive controller comes with a broad range of protective features. The output current of the drive is continuously monitored and in case of a steep current demand profile, the current limiter actuates and reduces the effective peak current dynamically in addition to generating an alarm. The velocity limiter of the drive works similarly and prevents overloading and overheating by limiting the command magnitude. With all four slots occupied, this drive weighs around 19 kg. you can mount the HDS04.1-W200N-HS12-01-FW into a closed housing or a control cabinet. This controller is designed to satisfy the protection category IP10. The HDS04.1-W200N-HS12-01-FW can be shipped to any address worldwide with a one-year warranty period from Wake Industrial.