Product Description
The HDS03.2-W100N-HS45-01-FW is a configured drive controller. This controller made by Bosch Rexroth has a function ID code of 45 with a 01 version. The cooling system must be set to operate at a temperature of 40°C and not at a lower temperature. The product should be installed in a well-sealed control cabinet to ensure that the humid air flow inside it does not cause condensation. The cooling system must continue to operate even after the machine is turned off until the installed units and the air circulating in the control cabinet has the same temperature. The device has a warranty period of one year.
This controller must be transported using shock-absorbing supports in suitable transportation equipment to protect it from excessive vibrations and shocks. There must be a distance of at least 100mm between the connected control or signal and power cables. The unit has a type plate above the basic unit and a type plate on the inserted card adjacent to the plug-in modules. The drive controller must always be mounted in vertical orientation inside the control cabinet. The connection to the motor should be established at the bottom. The mounting rails must be fastened in alternate slots using M5 screws.
The ground connection must be established at the bottom edge of the controller with the help of a grounding clip. The components of this product are checked for high insulation and voltage according to DIN VDE 0160 specifications. The configured drive controller has a weight of 11kg. It must be operated in an ambient temperature range of +5°C and +45°C. The product should be installed within an altitude of 1,000m above sea level. There are chances of the controller getting damaged if it is used outside of the ambient conditions. We can ship this product to you through our multiple delivery partners like DHL, FedEx, etc.