Product Description

The HDS03.2-W100N-HS23-01-FW configured drive controller from Bosch Rexroth has a modular structure. The device utilizes a SERCOS interface for command communication. It is capable of performing as a rapid-response, main or servo drive. The unit has a function ID code of 23. The product incorporates an HZK capacitor module if there are a large number of start-stop cycles. No structural changes must be made to this configured controller. It is intended for use in multiple and single-axis control and drive applications. This product must not be operated underwater. If the drive controller has to be replaced or changed, the drive parameters can be set in the new unit through the software module insertion.

The drive controller must be programmed before it is started so that the motor can execute a particular function of an application. This device is equipped with a built-in blower for the cooling mechanism. It has a continuous current rating of 50A/35A at 4kHz/8kHz clock frequency of the power section. The product supports a maximum ambient operating temperature of 55°C. At this temperature, the load factors must be taken into consideration. The unit uses a flat cable for bus connection. The configured drive controller comes with a one-year warranty period.

The controller can be used in a wide range of handling and mounting systems. The slots in the basic drive controller are empty. This unit renders support for several additional plug-in modules such as interface cards for several measuring systems, integrated control and digital I/O cards. It belongs to the HDS product family of configured drive controllers. The product must be mounted inside a closed housing or a control cabinet that meets EN 50175/1988 specifications. The device has four analog diagnostic inputs. The configured drive controller can be safely dispatched to your address through our reliable delivery partners.